House construction

Separating walls and separating floors

One of the most important requirements for separating walls and separating floors is their acoustic properties (i.e. airborne sound insulation). The typical assemblies of separating walls and separating floors used by our company allow us to comply with the sound insulation standards. Inside separating bearing walls achieve the value of at least 52 db, whereas inside separating non-bearing walls achieve the value of at least 36 db.  

Outside walls and roof panels 


One of the most important requirements for outside walls and roof panels is thermal insulation. Proper assembly of panels allows us to achieve in these structures the maximum thermal resistance which complies with the current requirements. The outside walls achieve the thermal resistance value of 5 sq. m K/W and the roof - the value of 6 sq. m K/W. 

 Outside walls
ENG OutsideWallF
  • Wooden outside boards, clinker bricks, thermoinsulating panel
  • OSB board 12 mm
  • Wooden frames 45 x 145 mm
  • Thermal insulation 150 mm
  • Steam insulation
  • Wooden square beams 45 x 45 mm
  • Thermal insulation 50 mm
  • OSB board 12 mm
  • Plaster board 12.5 mm
    Heat transfer coefficient 0.2 W/m2K 
Inside walls, bearing walls
ENG InteriorLoadBearingF
  • Plaster board 12.5 mm
  • OSB board 12 mm
  • Wooden frames 45 x 145/ 95/ 75/45 mm
  • Sound insulation 150/100/70/50 mm
  • OSB board 12 mm
  • Plaster board 12.5 mm
Ceiling
ENG FloorSlabF
  • OSB board with tongue 22 mm
  • Wooden frames 60 / 45 x 220/ 200 mm
  • Sound insulation 100 mm
  • Wooden square beams 45 x 45 mm
  • Plaster board 12.5 mm
 Roof construction

ENG InsulatedRoofF

Contact us: Paulius Kirdulis
+370 685 18696
Kristina Zazė
+370 650 60647